OLD-CasperLet/Quick Start
 | Please take the time to thoroughly read the entire page so that you have a better understanding of how the system works. |
New User Information
The following text assumes that you are new to the concept of networked rental systems in general (not just CasperLet), and thus explains both the fundamental concepts as well as the steps necessary to set up the system.
About the DropBox
The DropBox contains the notecards and landmarks for your rentals. Notecards are given in two situations. One, when a user clicks for "Info" and Two, when a tenant pays for a rental.
One DropBox per CasperLet system Owner is required. Having duplicates on at least one additional sim/region is highly recommended to work around sim/region communication issues.
See DropBoxes for full details and instructions on how to deploy and use the DropBox.
See the notecard delivery section for detailed instructions on how to properly set up notecards.
About the Units page
The Units page is also frequently called the "bulk", "global settings", or "global defaults" page, and also is the page referred to when you see "bulk setup" in the documentation. The "units" page controls the base configuration for all of your rental units.
If you have any units that will have a different configuration than the default, they will need to be configured on a per-unit basis - individual unit configuration will override the global defaults where they differ.
CasperLet currently does not support rental "profiles" for rental units. (A suggestion ticket is in the queue for it, however, and it is expected to be added at some point in the future.)
Creating your CasperLet Account
See the CasperLet account creation section.
Other Terminology
Please remember "sign" is not another word for rental unit, and you WILL confuse the support staff if you refer to a rental unit as a sign.
There is an actual sign object in the CasperLet shipping crate that can be used WITH a rental - but it is not a rental unit by itself, and it must be linked TO a rental unit.
Rental Units At A Glance
To see your rentals at-a-glance, use the Regions page. You will be shown pictures of your sims, with boxes showing where on the region your units are located.
If you have deleted units inworld via "edit > delete", they will still appear here until they are cleared off with a site scan for units
Rental Unit Versions
Documentation on this page expects that all of your rental units are version 1.31 or later.
CasperLet Rental units version 1.2x and older are no longer supported. If you have older versions rezzed out, you must update them to the current version in order to receive technical support. Simply redeliver the CasperLet cate to receive an up-to-date UpgradeBee. Any prior version Bee will not have the current version of the script.
Setup Limitation
Currently CasperLet does not support rental profiles. If you have two or more "base configuration sets" (that are dependent on the rental), you will still need to choose one as the default, and change the rest individually - this will be using the bulk + individual section below.
A suggestion ticket is in the queue to add rental profile functionality.
Quick Start Sections
- If all of your rental units will use the same base configuration, follow the instructions in "bulk setup" section.
- If SOME of your rental units will use the same base config, but you will have SOME units with different settings, use the "Bulk + individual setup" section.
- If all of your rental units will use different configurations, use the "individual setup" section below.
Bulk Setup
1) Unpack your CasperLet shipping crate
- If you're curious, you can see a list of what's in the box with links to explain some of the included tools.
2) Rez one (non-"slave") rental unit PER RENTAL
- If the tenant will be taking OWNERSHIP of the parcel (such as with land sales on an island estate), the rental unit must NOT be rezzed on the parcel to which they take ownership. As a side-effect, this means the prim-counting feature will not function.
- If the landlord is retaining ownership of the parcel that the tenant is renting (such as with vending events or shopping malls), the rental unit should be ON the parcel.
- The object names of the primary/master units to use are as follows:
CasperLet Rental Box CasperLet Rental Meter CasperLet Mesh Rental Meter
- Units with "slave" in the name are strictly a command relay object. They do not store settings at all, and you cannot use them in place of a primary/master unit.
Manager handling your setup?
Rez out all the units that are needed - or drag-copy as many as you need - NOW before the configuration process begins!
3) Grant debit permissions
- See the debit permissions page to details of what these are and why they should be granted.
- NOTE: If you are re-rezzing a copy of a unit you've already granted permissions for, you won't see another debit perms popup. This is normal.
4) Recognize rented state changes?
- Follow the instructions on the CasperLet customisation page to make sure they STILL change once you're done with configuration. If you make changes without following these instructions, rental units will not change between rented and available states.
5) Go to CasperLet website and log in
- Click one of your rental units, select "config" from the popup menu, use that link to go to the website, and log in.
6) Set your bulk settings
- Go to the Units page when logged in, and set your options. Remember to click "SAVE" anytime you have a "save" option on a setting, and then use the "save" button at the BOTTOM of the bulk page as well.
- This means change only ONE option at a time, and when you have a "save" button for that option, click "save" once it's set!
Bulk + Individual Setup
1) Unpack your CasperLet shipping crate
- If you're curious, you can see a list of what's in the box with links to explain some of the included tools.
2) Rez one (non-"slave") rental unit PER RENTAL
- If the tenant will be taking OWNERSHIP of the parcel (such as with land sales on an island estate), the rental unit must NOT be rezzed on the parcel to which they take ownership. As a side-effect, this means the prim-counting feature will not function.
- If the landlord is retaining ownership of the parcel that the tenant is renting (such as with vending events or shopping malls), the rental unit should be ON the parcel.
- The object names of the primary/master units to use are as follows:
CasperLet Rental Box CasperLet Rental Meter CasperLet Mesh Rental Meter
- Units with "slave" in the name are strictly a command relay object. They do not store settings at all, and you cannot use them in place of a primary/master unit.
Manager handling your setup?
Rez out all the units that are needed - or drag-copy as many as you need - NOW before the configuration process begins!
3) Grant debit permissions
- See the debit permissions page to details of what these are and why they should be granted.
- NOTE: If you are re-rezzing a copy of a unit you've already granted permissions for, you won't see another debit perms popup. This is normal.
4) Recognize rented state changes?
- Follow the instructions on the CasperLet customisation page to make sure they STILL change once you're done with configuration. If you make changes without following these instructions, rental units will not change between rented and available states.
5) Go to CasperLet website and log in
- Click one of your rental units, select "config" from the popup menu, use that link to go to the website, and log in.
6) Set your bulk settings
- Go to the Units page when logged in, and set your options. Remember to click "SAVE" anytime you have a "save" option on a setting, and then use the "save" button at the BOTTOM of the bulk page as well.
- This means change only ONE option at a time, and when you have a "save" button for that option, click "save" once it's set!
7) Set your different individual settings
- For each unit you want different from your base defaults, you will need to:
- Click that specific unit
- Select "config" from the popup menu
- Arrive at the individual unit's configuration page
- Make your changes
- Remember to click "save" for each option with a "save" button
- Remember to click "save" at the bottom when done
Individual Unit Setup
1) Unpack your CasperLet shipping crate
- If you're curious, you can see a list of what's in the box with links to explain some of the included tools.
2) Rez one (non-"slave") rental unit PER RENTAL
- If the tenant will be taking OWNERSHIP of the parcel (such as with land sales on an island estate), the rental unit must NOT be rezzed on the parcel to which they take ownership. As a side-effect, this means the prim-counting feature will not function.
- If the landlord is retaining ownership of the parcel that the tenant is renting (such as with vending events or shopping malls), the rental unit should be ON the parcel.
- The object names of the primary/master units to use are as follows:
CasperLet Rental Box CasperLet Rental Meter CasperLet Mesh Rental Meter
- Units with "slave" in the name are strictly a command relay object. They do not store settings at all, and you cannot use them in place of a primary/master unit.
Manager handling your setup?
Rez out all the units that are needed - or drag-copy as many as you need - NOW before the configuration process begins!
3) Grant debit permissions
- See the debit permissions page to details of what these are and why they should be granted.
- NOTE: If you are re-rezzing a copy of a unit you've already granted permissions for, you won't see another debit perms popup. This is normal.
4) Recognize rented state changes?
- Follow the instructions on the CasperLet customisation page to make sure they STILL change once you're done with configuration. If you make changes without following these instructions, rental units will not change between rented and available states.
5) Go to CasperLet website and log in
- Click one of your rental units, select "config" from the popup menu, use that link to go to the website, and log in.
6) Set your different individual settings
- For each unit you want different from your base defaults, you will need to:
- Click that specific unit
- Select "config" from the popup menu
- Arrive at the individual unit's configuration page
- Make your changes
- Remember to click "save" for each option with a "save" button
- Remember to click "save" at the bottom when done
Notecard delivery
Only you - the system owner - can edit and replace the notecards. Managers are not able to do this.
Managers may select different notecards from the supply that is already in the DropBox.
Selecting Notecards
- Place your "information" and "rented" notecards in your DropBox.
- Log in to the CasperLet website
- If you have one notecard for all rentals, then select the notecard via the bulk Units page.
- If you have multiple notecards for different rentals, one may be set on the bulk Units page, but the rest will have to be set via the individual unit configuration pages.
Selecting Landmarks
- Place your landmark(s) in the Dropbox
- Log in to the CasperLet website
- If you have one landmark to use with all of your rentals (such as a rental HQ area), then select that landmark via the bulk Units page.
- If you have multiple landmarks for different rentals (for example, if you have one landmark per rental), they will need to be set via the individual unit configuration pages.
For more information about DropBoxes, and why they need to stay rezzed out, see the page with DropBox information.
Remember: Scripted objects in general will not function if you do not rez them under the proper land group. DropBoxes are no exception.
(If you have both CasperVend and CasperLet, it is normal to see all of your notecards, from both CasperVend and CasperLet, in the notecard selector box, regardless of whether the DropBox originally came from a CasperVend or CasperLet pack.)