CasperVend 2/Customisation

Technical Support

Owing to the fact that vendor customisation is an advanced topic which depends on a certain level of ability, we do not provide technical support for this process. The instructions below provide all the information you need to create your own vendor, however alternatively you can pay us to do it - see our Customisation Service.

Offline / Back Soon Textures

Inside each vendor are two textures: "BACK_SOON" and "VENDOR_OFFLINE"

Simply create two replacement textures, name the appropriate one with the appropriate name, Delete the old ones out of the vendor, and replace with the new. It's that easy!

Touch Vendor

The touch vendor allows the customer to interact with it by way of a touch menu instead of buttons on one of the faces. This means that the vendor can be in a standard" box shape, with customers being able to interact with all sides of the vendor instead of only one or two sides of it.

The touch vendor is only designed to vend ONE product - so don't use a profile that has multiple items in it, because only one of them will be displayed. It has no way to scroll between items.

Customising the Headless Vendor

The "Headless" vendor allows you to take the contents and drop them into one of your own objects - you can essentially turn one of your products into a vendor this way.

If you ONLY want your objects to accept the "PAY" function without having menu or button options, simply drop the script in the object without a MAPPING notecard.

Caveat: This is not recommended for furniture that gets sat on - the vendor script will soft-reset anytime an avatar sits or unsits, since LSL sees it as a change in the linkset. We recommend the holovendors to display furniture instead.

Remember that "Headless" vendors can ONLY vend ONE product. Link them to products the same as you would as if you were using the 1-prim STATIC vendor.

Making A Non-Vendor Object Into A Vendor

1. Take the vendor script AND "mapping" notecard out of the headless vendor into your inventory
2. Drop the script and notecard from your inventory into your product
3. Click the object, and select "Admin"
4. Log in to the website, if necessary
5. You will be taken to the configuration page for that vendor product
6. Change your options as desired
7. All set!

Remember: All vendor objects NEED a mapping notecard - they will not function without it. You do NOT need to set up panels, but the vendor script does need to know that it can accept payments from all faces.

Example Vendor - "EasyMod"

This is an example vendor set up just so that you can see the maximum possible buttons. Each prim in the vendor is labeled with the appropriate button name the script is looking for.

Included inside the EASYMOD vendor example are all the default button textures, as individual textures.

The "EasyMod" is NOT intended to actually be used AS a vendor - only as an example of the complete setup.

NOTE: The numbering on the prims of the EasyMod may not necessarily match the order of the mapping helper script panels. This is just a sample layout.

Naming Your Prims

If you look at the "Easymod" example, you'll notice that each of those prims has a different name. This is CRITICALLY IMPORTANT - because the mapping script essentially looks for "the face ____ on the prim named ____" - if of your customised vendor prims are ALL named "object" your mapping will be very VERY confused, and your custom vendor will NOT work properly!

You do not need to have one prim per used face - as evidenced by the many primsaver type options in the Free / Premium packs and third party addons - however each prim that IS used, needs to have its own unique name.

Using the "CasperVend Mapping Helper" Script

Drop this script into a vendor prim or linked vendor object.

Click and it will give you a popup menu with the options:

Reset

This wipes any configuration you've done up to that point

Textures

There are 13 possible texture displays on a vendor, and this option walks you through selecting which display is which. If you're having trouble visualising the usual order of these buttons, rez out the "EasyMod" from the Customisation box and look at how the prims are named. (use Edit > Linked Parts if necessary).

You do not need to be in "edit" mode to do this step - being in edit mode means you have to right-click, THEN "touch" as opposed to just clicking the prim.

The script wants you to tell it the faces of the display panels. It is looking for this information in the following order:

1. Left panel six
2. Left panel five
3. Left panel four
4. Left panel three
5. Left panel two
6. Left panel one
7. Main texture panel
8. Right panel 1
9. Right panel 2
10. Right panel 3
11. Right panel 4
12. Right panel 5
13. Right panel 6

If you want to use all sides of a prim for one or more of those faces, then click "ALL SIDES" on the popup menu, BEFORE clicking the prim. It will give you another popup once it's processed the "ALL SIDES" selection and is ready for you to click the prim.

You WILL be having popup dialogues for each step. The one for the current step will always be on top - ignore the ones that are left up from earlier. It is NOT required to click "ok" or "ignoree" on the popups menus before proceeding to the next step but you can if you want to. (LSL doesn't allow self-closing of popup menus.)

Just click "skip" for the display panels you're not using. If you're using a simple one-prim, one-item vendor, then just use "skip" on everything BUT the "Main Texture Panel".

Buttons

This maps the clickable button areas from TOP LEFT to BOTTOM RIGHT, in the following order:

1. Page Left
2. Scroll Left
3. Admin Button
4. Search Button
5. Help Button
6. Demo Button
7. Gift Button
8. Scroll Right
9. Page Right
10. Rez

As with the texture panels above, just click "skip" on the options you're not using. (For example, not everyone uses the demo button.)

Yes, this can be used to customize buttons for a v2.x HoloVendor!

Finish

This does two things: (1) Sends the configuration to a code pasting site, and (2) gives you the link to the page it went to so you can copy it. Remember this link is valid for just one hour so if you get distracted and it expires, you'll have to do the configuration all over again.

Copy the configuration file from pastebin into a notecard and drop it in your vendor.

NOTE:

MAPPING notecards should have 37 lines for a normal vendor, and 38 lines for a holovendor. If you generated one that is longer or shorter than this, tell the mapping helper script to "reset" and go through the process again.

Delete the mapping helper script from the vendor once everything else is complete

Copy the MAPPING list from the pastebin site into a notecard and drop it in the vendor.

All done!

FAQ / Troubleshooting

Q. I just noticed setting my vendors to "offline" makes them all a flat grey colour - can I replace that with my own image?

A. The vendors are going grey because you don't have the "VENDOR_OFFLINE" texture in the vendor. So yes, you can replace it with your own branded texture - they only went grey because there wasn't ANY texture by that name.

Q. A vendor I'm setting up for a new profile has a quirk, each time I "touch" it, it tells me "(my vendor name): Touched" - and does not display the menu, just gives me that message. How do I fix this?

A. Look inside the vendor contents for a script named "New Script". The script that ships with the vendor will never be named this, so if there is a script named "New Script" it may safely be deleted. (You may have accidentally clicked "new script" - which creates a script that just tells you the object was touched.)

Q. Can the vendor be set up as a cube - a box, rather than a poster?

A. Rez the "Touch" vendor - that uses just a menu, so it can be re-shaped to be a box. You'll need to customise the texture mapping so that the product image is shown on all sides.

Q. I want to use the "Headless" vendor script in my furniture, but it keeps resetting every time people sit on it!

A1. You may find it easier to use a HoloVendor for furniture, rather than the headless script.

A2. Alternately, you can use a regular vendor box near the furniture you have out.

Q. Can I set the vendors to "Phantom"?

A. Yes, and they will still work :)

Q. I pulled out a new vendor / did custom mapping for this vendor and the buttons / panels / main panel aren't working / aren't giving me the popup menu.

A1. Generally, if a button or panel isn't working or responding, or you're unable to get a touch/popup menu on the main panel, then the mapping needs to be redone. You may have already custom mapped it, but something may have gotten "confused" in the copy/paste process going from the pastebin site to the notecard. If it hasn't been an hour yet you can just carefully re-copy the mapping information off the webpage.

A2. If you've gone through the mapping more than once on that vendor and it's still not working right, you will need to "Reset" the mapping script first before trying again.

Q. I've read the instructions, but I just can't figure this out! Help!

A. Casper Warden offers a customisation service - see this page for details.