OLD-CasperLet/Quick Start: Difference between revisions

From CasperTech Wiki
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
Line 1: Line 1:
{{Information|Please take the time to thoroughly read the entire page so that you have a better understanding of how the system works.'''}}
{|align=right
{|align=right
   |__TOC__
   |__TOC__
   |}
   |}


= '''<span style="color:#00528c">Quick Start</span>''' =
= '''<span style="color:#00528c">New User Information</span>''' =
 
The following text assumes that you are new to the concept of networked rental systems in general (not just CasperLet), and thus explains both the fundamental concepts as well as the steps necessary to set up the system.
 
=== About the DropBox ===
----
The DropBox contains the notecards and landmarks for your rentals. Notecards are given in two situations. One, when a user clicks for "Info" and Two, when a tenant pays for a rental.
 
One DropBox '''per''' CasperLet system Owner is required. Having duplicates on at least one additional sim/region is '''highly''' recommended to work around sim/region communication issues.
 
See '''[[CasperVend_2/DropBoxes | DropBoxes]]''' for full details and instructions on how to deploy and use the DropBox.
 
See the '''[[CasperLet/Detailed_Setup#Notecard_delivery | notecard delivery]]''' section for detailed instructions on how to properly set up notecards.
 
=== About the Units page ===
----
The '''[https://let.casperdns.com/units.php Units page]''' is also frequently called the "bulk" or "global settings" page, and also is the page referred to when you see "bulk setup" in the documentation. The "units" page controls the base configuration for all of your rental units.
 
If you have '''any''' units that will have a different configuration than the default, they will need to be configured on a per-unit basis.
 
CasperLet currently does not support rental "profiles" for rental units. (A suggestion ticket '''is''' in the queue for it, however, and it is expected to be added at some point in the future.)
 
=== Creating your CasperLet Account ===
----
See the '''[[CasperVend_2/Password_Reset#Creating_Your_CasperDNS.com_Account | CasperLet account creation section]]'''.
 
=== Other Terminology ===
----
Please remember "sign" is '''not''' another word for rental unit, and you '''WILL''' confuse the support staff if you refer to a rental unit as a sign.
 
There is an actual sign object in the CasperLet shipping crate that can be used WITH a rental - but it is not a rental unit by itself, and it must be linked TO a rental unit.
 
=== Rental Units At A Glance ===
----
To see your rentals at-a-glance, use the '''[https://let.casperdns.com/regions.php Regions]''' page. You will be shown pictures of your sims, with boxes showing where on the region your units are located.
 
If you have deleted units inworld via "edit > delete", they will still appear here until they are cleared off with a '''[[Website_Scans#Scanning_for_Rental_Units | site scan for units]]'''
 
=== Rental Unit Versions ===
----
Documentation on this page expects that all of your rental units are version 1.31 or later.
 
CasperLet Rental units version 1.2x and older are '''no longer supported'''. If you have older versions rezzed out, you '''must update''' them to the current version in order to receive technical support. Simply redeliver the CasperLet cate to receive an up-to-date UpgradeBee. Any prior version Bee will not have the current version of the script.
 
=== Setup Limitation ===
----
Currently CasperLet does not support rental profiles. If you have '''two''' or more "base configuration sets" (that are dependent on the rental), you will still need to choose '''one''' as the default, and change the rest individually - this will be using the '''[[#Bulk_.2B_Individual_Setup | bulk + individual]]''' section below.


These are the simplified instructions for people who have never used CasperLet (or any other networked rental system) before. Remember that CasperLet is a rental '''management''' system, and as you will soon see, it's really really easy!
A suggestion ticket '''is''' in the queue to add rental profile functionality.
&nbsp;


= '''<span style="color:#00528c">Quick Start Sections</span>''' =
:* If all of your rental units will use the same base configuration, follow the instructions in "bulk setup" section.
:* If SOME of your rental units will use the same base config, but you will have SOME units with different settings, use the "Bulk + individual setup" section.
:* If all of your rental units will use different configurations, use the "individual setup" section below.


: '''<big>1) Unpack your CasperLet shipping crate </big>'''
== '''<span style="color:#00528c">Bulk Setup</span>''' ==
=== 1) Unpack your CasperLet shipping crate ===
----
----
: ''If you wish, you can see a list of '''[[CasperLet/Introduction | what's in the box]]''' with links to explain some of the tools in there. ''
: ''If you're curious, you can see a list of '''[[CasperLet/Introduction | what's in the box]]''' with links to explain some of the included tools. ''


&nbsp;
=== 2) Rez one (non-"slave") rental unit PER RENTAL ===
: '''<big>2) Rez a new (NON-"slave") rental unit PER rental</big>'''
----
----
: ''If the tenant will TAKE OWNERSHIP of the parcel (such as with land sales on an island estate) then the rental unit must NOT be on the parcel they're taking ownership of. This also means prim counting won't work.''
: ''f the tenant will be taking OWNERSHIP of the parcel (such as with land sales on an island estate), the rental unit must NOT be rezzed on the parcel to which they take ownership. As a side-effect, this means the prim-counting feature will not function.''


: ''If the landlord is retaining ownership of the parcel that the tenant is renting (such as with vending events or shopping malls), the rental unit should be ON the parcel.''
: ''If the landlord is retaining ownership of the parcel that the tenant is renting (such as with vending events or shopping malls), the rental unit should be ON the parcel.''


    '''The object names of the primary/master units are as follows:'''
: The object names of the primary/master units to use are as follows:
        ''CasperLet Rental Box ''
  ''CasperLet Rental Box ''
        ''CasperLet Rental Meter''
  ''CasperLet Rental Meter''
        ''CasperLet Mesh Rental Meter''
  ''CasperLet Mesh Rental Meter''


&nbsp;
: ''Units with "slave" in the name are strictly a command '''relay''' object. They do not store settings '''at all''', and you cannot use them in place of a primary/master unit.


: '''<big>3) Grant debit permissions </big>'''
==== ''Manager handling your setup?'' ====
----
----
: ''See the '''[[Debit_Permissions | debit permissions]]''' page for details of what these are and why they should be granted.''
''Rez out all the units that are needed - or drag-copy as many as you need - '''NOW''' before the configuration process begins!
: <span style="color:#F00;">'''''NOTE:''' If you are re-rezzing a copy of a unit you've already granted permissions for, you won't see another debit perms popup. This is normal. You will, however, still need to reconfigure the re-rezzed unit - re-rezzing loses old configurations.''</span>


&nbsp;
=== 3) Grant debit permissions ===
: '''<big>4) Configuring a lot at once? Having a manager do most of the work?</big>'''
----
----
: ''Rez out all the units - or drag-copy as many as you need - '''NOW''' before you start the config process!''
: ''See the '''[[Debit_Permissions | debit permissions]]''' page to details of what these are and why they should be granted.''


&nbsp;
: <span style="color:#F00;">''NOTE: If you are re-rezzing a copy of a unit you've already granted permissions for, you won't see another debit perms popup. This is normal. ''</span>


: '''<big>5) Do you want the rental unit textures to change with rented/available/etc?</big>'''
=== 4) Recognize rented state changes? ===
----
----
: ''Follow the instructions on the '''[[CasperLet/Customisation#Getting_Textures_.2F_Colours_.2F_Text_To_Change_When_Rented | CasperLet customisation page]]''' to make sure they STILL change once you're done with configuration. If you make changes without following these instructions, rental units '''will not change''' between rented and available states.  
: ''Follow the instructions on the '''[[CasperLet/Customisation#Showing_Rental_State_Changes_Automatically | CasperLet customisation page]]''' to make sure they STILL change once you're done with configuration. If you make changes without following these instructions, rental units will not change between rented and available states. ''


&nbsp;
=== 5) Go to CasperLet website and log in ===
----
: ''Click one of your rental units, select "config" from the popup menu, use that link to go to the website, and log in.''


: '''<big>6) Click the unit and select "Config" from the popup menu </big>'''
=== 6) Set your bulk settings ===
----
----
: ''Simply click ("touch") the rental unit, and select "Config" from the popup menu.''
: ''Go to the '''[https://let.casperdns.com/units.php Units]''' page when logged in, and set your options. Remember to click "SAVE" anytime you have a "save" option on a setting, and then use the "save" button at the BOTTOM of the bulk page as well.  
 
: ''This means change only ONE option at a time, and when you have a "save" button for that option, click "save" once it's set!''


&nbsp;
== '''<span style="color:#00528c">Bulk + Individual Setup</span>''' ==
: '''<big>7) Let it take you to the website</big>'''
=== 1) Unpack your CasperLet shipping crate ===
----
----
: ''Using the link from the rental unit means this will take you to the page where you can set the unit's options, once you are logged in. For example, price, auto-evict, etc.
: ''If you're curious, you can see a list of '''[[CasperLet/Introduction | what's in the box]]''' with links to explain some of the included tools. ''


&nbsp;
=== 2) Rez one (non-"slave") rental unit PER RENTAL ===
: '''<big>8) Create a CasperDNS account (NOT CasperVend) if necessary. Otherwise, just log in. </big>'''
----
----
: ''You can find instructions on how to create a CasperDNS account on the '''[[CasperVend_2/Password_Reset#Creating_Your_CasperDNS.com_Account | passwords page]]'''.
: ''f the tenant will be taking OWNERSHIP of the parcel (such as with land sales on an island estate), the rental unit must NOT be rezzed on the parcel to which they take ownership. As a side-effect, this means the prim-counting feature will not function.''


&nbsp;
: ''If the landlord is retaining ownership of the parcel that the tenant is renting (such as with vending events or shopping malls), the rental unit should be ON the parcel.''
: '''<big>9) Set desired configuration options, saving each change.</big>'''
 
: The object names of the primary/master units to use are as follows:
  ''CasperLet Rental Box ''
  ''CasperLet Rental Meter''
  ''CasperLet Mesh Rental Meter''
 
: ''Units with "slave" in the name are strictly a command '''relay''' object. They do not store settings '''at all''', and you cannot use them in place of a primary/master unit.  
 
==== ''Manager handling your setup?'' ====
----
----
: <span style="color:#F00;">'''''IMPORTANT: Change only ONE option at a time, and when you have a "save" button for that option, click "save" once it's set!'''''</span>
''Rez out all the units that are needed - or drag-copy as many as you need - '''NOW''' before the configuration process begins!


= '''<span style="color:#00528c">Renaming Rental Units</span>''' =
=== 3) Grant debit permissions ===
&nbsp;
: '''<big>1) From in-world, change the name of the rental unit</big>'''
----
----
: ''There is no option to change the name from the website at this time.''
: ''See the '''[[Debit_Permissions | debit permissions]]''' page to details of what these are and why they should be granted.''
&nbsp;
 
: '''<big>2) Click the unit, select "reset" from popup menu</big>'''
: <span style="color:#F00;">''NOTE: If you are re-rezzing a copy of a unit you've already granted permissions for, you won't see another debit perms popup. This is normal. ''</span>
 
=== 4) Recognize rented state changes? ===
----
----
: ''The website needs to pick up the new name from the unit, not the other way around - this is why the menu reset (or "soft reset") is necessary. '''DO NOT''' just pick up and re-rez or you will lose the configuration!''
: ''Follow the instructions on the '''[[CasperLet/Customisation#Showing_Rental_State_Changes_Automatically | CasperLet customisation page]]''' to make sure they STILL change once you're done with configuration. If you make changes without following these instructions, rental units will not change between rented and available states. ''
&nbsp;
 
: '''<big>3) Repeat for each unit to rename</big>'''
=== 5) Go to CasperLet website and log in ===
----
----
: ''For each rental unit you want to rename, simply repeat steps 1 and 2 in this section.''
: ''Click one of your rental units, select "config" from the popup menu, use that link to go to the website, and log in.''


= '''<span style="color:#00528c">Counting Prims</span>''' =
=== 6) Set your bulk settings ===
: '''<big>Rez one prim counter per land owner (NOT per avatar)</big>'''
----
----
: ''See the '''[[CasperLet/Prim_Counter | prim counter]]''' page for usage details, proper setup, and limitations. Group-owned land requires the prim counter to be deeded to that group. Land owned by an individual, but "set" to a group, does NOT require deeding.''
: ''Go to the '''[https://let.casperdns.com/units.php Units]''' page when logged in, and set your options. Remember to click "SAVE" anytime you have a "save" option on a setting, and then use the "save" button at the BOTTOM of the bulk page as well.  


: ''If you want to see an overview of where your units are inworld, you can click on the '''''Regions''''' icon when logged in on the CasperLet website.''
: ''This means change only ONE option at a time, and when you have a "save" button for that option, click "save" once it's set!''


: '''<big>No prim count in rental unit hover text</big>'''
=== 7) Set your different individual settings ===
----
----
: ''As part of the low-lag goals of CasperLet, the prim counter only counts prims every 3 or 6 hours, depending on whether it's an older or newer version. As a result, the hovertext over the rental unit will NOT show the prim count, ever, because it is not updated dynamically (but rather on a lengthy timed basis), and would thus otherwise cause confusion.''
: ''For '''each''' unit you want different from your base defaults, you will need to:
::# Click that specific unit
::# Select "config" from the popup menu
::# Arrive at the individual unit's configuration page
::# Make your changes
::# Remember to click "save" for each option with a "save" button
::# Remember to click "save" at the bottom when done


:'''<big>Total prim/impact limit is too much</big>'''
== '''<span style="color:#00528c">Individual Unit Setup</span>''' ==
=== 1) Unpack your CasperLet shipping crate ===
----
----
: ''You may have prim consolidation turned on. This is only necessary when one person is renting more than one unit on a sim/region. This may also happen when there's a rental unit somewhere that's been manually (edit > deleted) deleted, rather than properly popup menu deleted - or the land has been reparcelled / redivided - that is currently being included in the count.''
: ''If you're curious, you can see a list of '''[[CasperLet/Introduction | what's in the box]]''' with links to explain some of the included tools. ''


: ''To fix, check the prim consolidation setting, and/or run a scan - only click that option '''ONCE''' - from the CasperLet website. Running a CasperLet UpgradeBee will '''NOT''' clear out deleted units! The website scan will take at least a few hours, time is dependent on the sim/region's back end response to the CasperLet system commands.''
=== 2) Rez one (non-"slave") rental unit PER RENTAL ===
----
: ''f the tenant will be taking OWNERSHIP of the parcel (such as with land sales on an island estate), the rental unit must NOT be rezzed on the parcel to which they take ownership. As a side-effect, this means the prim-counting feature will not function.''
 
: ''If the landlord is retaining ownership of the parcel that the tenant is renting (such as with vending events or shopping malls), the rental unit should be ON the parcel.''
 
: The object names of the primary/master units to use are as follows:
  ''CasperLet Rental Box ''
  ''CasperLet Rental Meter''
  ''CasperLet Mesh Rental Meter''
 
: ''Units with "slave" in the name are strictly a command '''relay''' object. They do not store settings '''at all''', and you cannot use them in place of a primary/master unit.


: ''If the problem is still not fixed when the scan is complete (check the Job Lots page and make sure there are no jobs listed), then send an IM to '''[http://secondlife:///app/agent/828f7198-42e5-41b4-bd60-926a33ea067b/about  CasperHelp Resident]''' and include the following:
==== ''Manager handling your setup?'' ====
:: ''1. SLURL to the unit''
----
:: ''2. SLURL to the prim counter''
''Rez out all the units that are needed - or drag-copy as many as you need - '''NOW''' before the configuration process begins!
:: ''3. Add "CasperHelp Resident" and "Casper Warden" to the security orb whitelist so he doesn't get bounced''
:: ''4. The expected prim count''
:: ''5. Any other pertinent details and screenshot links (gyazo, etc.)''


= '''<span style="color:#00528c">Frequently Used Options</span>''' =
=== 3) Grant debit permissions ===
You can also...
----
: ...Read about '''[[CasperLet/Detailed_Setup#About_the_Primary.2FMaster_and_Secondary.2FSlave_Units | "slave Units"]]'''
: ''See the '''[[Debit_Permissions | debit permissions]]''' page to details of what these are and why they should be granted.''
: ...See how to '''[[CasperLet/Detailed_Setup#Transferring_.2F_Copying_configuration | transfer a renter's configuration]]''' from one unit to another
: ...See how to '''safely''' - physically, inworld - '''[[CasperLet/Detailed_Setup#Physically_moving_units | move a rental unit]]'''
: ...Set different '''[[CasperLet/Discounts | discounts]]'''
: ...Set '''[[CasperLet/Detailed_Setup#Configuring_states | different states]]''' (positions, transparencies, etc.) for your rental units depending on whether they're available or rented
: ...Learn how to '''[[CasperLet/Detailed_Setup#Customising_.26_Renaming_Rental_Units | customise the different rental unit textures]]'''
: ...See how to properly '''[[CasperLet/Managers | add a manager to CasperLet]]'''
: ...Learn how to get '''[[CasperLet/Detailed_Setup#Notecard_delivery | notecards set up for delivery]]'''


&nbsp;
: <span style="color:#F00;">''NOTE: If you are re-rezzing a copy of a unit you've already granted permissions for, you won't see another debit perms popup. This is normal. ''</span>


= '''<span style="color:#00528c">More Advanced Options</span>''' =
=== 4) Recognize rented state changes? ===
----
: ''Follow the instructions on the '''[[CasperLet/Customisation#Showing_Rental_State_Changes_Automatically | CasperLet customisation page]]''' to make sure they STILL change once you're done with configuration. If you make changes without following these instructions, rental units will not change between rented and available states. ''


When you are ready to take advantage of the many additional options in CasperLet, such as transporter integration and setting up rental hubs, see the '''[[CasperLet/Detailed_Setup | complete user manual]]'''.
=== 5) Go to CasperLet website and log in ===
----
: ''Click one of your rental units, select "config" from the popup menu, use that link to go to the website, and log in.''


If you need help with your CasperLet system, please see the '''[[CasperVend_2/Getting Help|Getting Help]]''' page for information on how to get in touch with us.
=== 6) Set your different individual settings ===
----
: ''For '''each''' unit you want different from your base defaults, you will need to:
::# Click that specific unit
::# Select "config" from the popup menu
::# Arrive at the individual unit's configuration page
::# Make your changes
::# Remember to click "save" for each option with a "save" button
::# Remember to click "save" at the bottom when done


Thanks for using CasperLet!
= '''<span style="color:#00528c">How do I....?</span>''' =
:* '''[[CasperLet/Customisation#Renaming_units | Rename rental units]]'''
:* '''[[CasperLet/Prim_Counter | Count prims / allow tenant to count their prims]]'''
:* '''[[CasperLet/Transfer_Rental| Transfer a tenant from one rental to another]]'''
:* '''[[CasperLet/Discounts | Set discounts]]'''
:* '''[[CasperLet/Customisation#Showing_Rental_State_Changes_Automatically | Get units to show rented state changes]]'''
:* '''[[CasperLet/Managers | Properly add a manager]]'''
:* '''[[CasperLet/Detailed_Setup#Transporter_Integration | Link the Transporter to rental units]]'''

Revision as of 13:51, 12 May 2016

Please take the time to thoroughly read the entire page so that you have a better understanding of how the system works.

New User Information

The following text assumes that you are new to the concept of networked rental systems in general (not just CasperLet), and thus explains both the fundamental concepts as well as the steps necessary to set up the system.

About the DropBox

The DropBox contains the notecards and landmarks for your rentals. Notecards are given in two situations. One, when a user clicks for "Info" and Two, when a tenant pays for a rental.

One DropBox per CasperLet system Owner is required. Having duplicates on at least one additional sim/region is highly recommended to work around sim/region communication issues.

See DropBoxes for full details and instructions on how to deploy and use the DropBox.

See the notecard delivery section for detailed instructions on how to properly set up notecards.

About the Units page

The Units page is also frequently called the "bulk" or "global settings" page, and also is the page referred to when you see "bulk setup" in the documentation. The "units" page controls the base configuration for all of your rental units.

If you have any units that will have a different configuration than the default, they will need to be configured on a per-unit basis.

CasperLet currently does not support rental "profiles" for rental units. (A suggestion ticket is in the queue for it, however, and it is expected to be added at some point in the future.)

Creating your CasperLet Account

See the CasperLet account creation section.

Other Terminology

Please remember "sign" is not another word for rental unit, and you WILL confuse the support staff if you refer to a rental unit as a sign.

There is an actual sign object in the CasperLet shipping crate that can be used WITH a rental - but it is not a rental unit by itself, and it must be linked TO a rental unit.

Rental Units At A Glance

To see your rentals at-a-glance, use the Regions page. You will be shown pictures of your sims, with boxes showing where on the region your units are located.

If you have deleted units inworld via "edit > delete", they will still appear here until they are cleared off with a site scan for units

Rental Unit Versions

Documentation on this page expects that all of your rental units are version 1.31 or later.

CasperLet Rental units version 1.2x and older are no longer supported. If you have older versions rezzed out, you must update them to the current version in order to receive technical support. Simply redeliver the CasperLet cate to receive an up-to-date UpgradeBee. Any prior version Bee will not have the current version of the script.

Setup Limitation

Currently CasperLet does not support rental profiles. If you have two or more "base configuration sets" (that are dependent on the rental), you will still need to choose one as the default, and change the rest individually - this will be using the bulk + individual section below.

A suggestion ticket is in the queue to add rental profile functionality.

Quick Start Sections

  • If all of your rental units will use the same base configuration, follow the instructions in "bulk setup" section.
  • If SOME of your rental units will use the same base config, but you will have SOME units with different settings, use the "Bulk + individual setup" section.
  • If all of your rental units will use different configurations, use the "individual setup" section below.

Bulk Setup

1) Unpack your CasperLet shipping crate

If you're curious, you can see a list of what's in the box with links to explain some of the included tools.

2) Rez one (non-"slave") rental unit PER RENTAL

f the tenant will be taking OWNERSHIP of the parcel (such as with land sales on an island estate), the rental unit must NOT be rezzed on the parcel to which they take ownership. As a side-effect, this means the prim-counting feature will not function.
If the landlord is retaining ownership of the parcel that the tenant is renting (such as with vending events or shopping malls), the rental unit should be ON the parcel.
The object names of the primary/master units to use are as follows:
  CasperLet Rental Box 
  CasperLet Rental Meter
  CasperLet Mesh Rental Meter
Units with "slave" in the name are strictly a command relay object. They do not store settings at all, and you cannot use them in place of a primary/master unit.

Manager handling your setup?

Rez out all the units that are needed - or drag-copy as many as you need - NOW before the configuration process begins!

3) Grant debit permissions

See the debit permissions page to details of what these are and why they should be granted.
NOTE: If you are re-rezzing a copy of a unit you've already granted permissions for, you won't see another debit perms popup. This is normal.

4) Recognize rented state changes?

Follow the instructions on the CasperLet customisation page to make sure they STILL change once you're done with configuration. If you make changes without following these instructions, rental units will not change between rented and available states.

5) Go to CasperLet website and log in

Click one of your rental units, select "config" from the popup menu, use that link to go to the website, and log in.

6) Set your bulk settings

Go to the Units page when logged in, and set your options. Remember to click "SAVE" anytime you have a "save" option on a setting, and then use the "save" button at the BOTTOM of the bulk page as well.
This means change only ONE option at a time, and when you have a "save" button for that option, click "save" once it's set!

Bulk + Individual Setup

1) Unpack your CasperLet shipping crate

If you're curious, you can see a list of what's in the box with links to explain some of the included tools.

2) Rez one (non-"slave") rental unit PER RENTAL

f the tenant will be taking OWNERSHIP of the parcel (such as with land sales on an island estate), the rental unit must NOT be rezzed on the parcel to which they take ownership. As a side-effect, this means the prim-counting feature will not function.
If the landlord is retaining ownership of the parcel that the tenant is renting (such as with vending events or shopping malls), the rental unit should be ON the parcel.
The object names of the primary/master units to use are as follows:
  CasperLet Rental Box 
  CasperLet Rental Meter
  CasperLet Mesh Rental Meter
Units with "slave" in the name are strictly a command relay object. They do not store settings at all, and you cannot use them in place of a primary/master unit.

Manager handling your setup?

Rez out all the units that are needed - or drag-copy as many as you need - NOW before the configuration process begins!

3) Grant debit permissions

See the debit permissions page to details of what these are and why they should be granted.
NOTE: If you are re-rezzing a copy of a unit you've already granted permissions for, you won't see another debit perms popup. This is normal.

4) Recognize rented state changes?

Follow the instructions on the CasperLet customisation page to make sure they STILL change once you're done with configuration. If you make changes without following these instructions, rental units will not change between rented and available states.

5) Go to CasperLet website and log in

Click one of your rental units, select "config" from the popup menu, use that link to go to the website, and log in.

6) Set your bulk settings

Go to the Units page when logged in, and set your options. Remember to click "SAVE" anytime you have a "save" option on a setting, and then use the "save" button at the BOTTOM of the bulk page as well.
This means change only ONE option at a time, and when you have a "save" button for that option, click "save" once it's set!

7) Set your different individual settings

For each unit you want different from your base defaults, you will need to:
  1. Click that specific unit
  2. Select "config" from the popup menu
  3. Arrive at the individual unit's configuration page
  4. Make your changes
  5. Remember to click "save" for each option with a "save" button
  6. Remember to click "save" at the bottom when done

Individual Unit Setup

1) Unpack your CasperLet shipping crate

If you're curious, you can see a list of what's in the box with links to explain some of the included tools.

2) Rez one (non-"slave") rental unit PER RENTAL

f the tenant will be taking OWNERSHIP of the parcel (such as with land sales on an island estate), the rental unit must NOT be rezzed on the parcel to which they take ownership. As a side-effect, this means the prim-counting feature will not function.
If the landlord is retaining ownership of the parcel that the tenant is renting (such as with vending events or shopping malls), the rental unit should be ON the parcel.
The object names of the primary/master units to use are as follows:
  CasperLet Rental Box 
  CasperLet Rental Meter
  CasperLet Mesh Rental Meter
Units with "slave" in the name are strictly a command relay object. They do not store settings at all, and you cannot use them in place of a primary/master unit.

Manager handling your setup?

Rez out all the units that are needed - or drag-copy as many as you need - NOW before the configuration process begins!

3) Grant debit permissions

See the debit permissions page to details of what these are and why they should be granted.
NOTE: If you are re-rezzing a copy of a unit you've already granted permissions for, you won't see another debit perms popup. This is normal.

4) Recognize rented state changes?

Follow the instructions on the CasperLet customisation page to make sure they STILL change once you're done with configuration. If you make changes without following these instructions, rental units will not change between rented and available states.

5) Go to CasperLet website and log in

Click one of your rental units, select "config" from the popup menu, use that link to go to the website, and log in.

6) Set your different individual settings

For each unit you want different from your base defaults, you will need to:
  1. Click that specific unit
  2. Select "config" from the popup menu
  3. Arrive at the individual unit's configuration page
  4. Make your changes
  5. Remember to click "save" for each option with a "save" button
  6. Remember to click "save" at the bottom when done

How do I....?

Retrieved from "https://wiki.casperdns.com/index.php?title=OLD-CasperLet/Quick_Start&oldid=8610"