ThoysBot

Available for

---

Windows: Default

Linux: Must have Mono installed

Mac: Only with a Windows or Linux emulator

Instructions

1. Start your Thoys bot software

2. If you don't already have a bot added, please add and configure your bot according to Thoys' instructions

3. Please make sure your bot is added to the group, with rights to invite (and eject if necessary).

4. Go to Tools -> Configuration, "Bots" tab, and click the name of your bot

5. Under "Remote security code (KEEP THIS SECRET)", set a unique password. Don't use the same password that you use for anything else.

6. Make sure your own avatar (usually the avatar who purchased CasperLet) is added as an "Owner".

7. Click "Apply".

8. Log your bot in.

9. Use the bot's Name2Key command to get the UUID for both the bot itself and your owner avatar (from step 6). For instructions, see Name2Key below.

10. On the CasperLet website, click "Add Bot", and choose Thoys Bot. Click Next.

Steps to perform	Reference Image
Log in to CasperLet, go to the Group Bots page and click the "Add New" button. (If you already have existing bots set up, you will see a list of bots under the "Add New" button - if you wish to edit an existing bot configuration, click the "Edit" button next to the name of the bot you want to edit instead.)	Click for larger image
Use the pulldown to select your bot type.	Click for larger image
You will be presented with information about: The bot type you've chosen Where to purchase the bot in question (in case you don't have it already). These screen assumes your choice is ThoysBot.	Thoys bot info
If you have selected Thoys bot you'll see this screen. Remember that: Label = Display name of that bot as you want it to appear in your bots list. Once you are done entering in setup information, click the "Next" button. If you've missed information that is required, there will be a popup screen to tell you what you're missing when you click "Next".	Click for larger image
Now you will arrive at the test screen. Click the blue "Test Now" button to begin testing the configuration.	Click for larger image
You will get a "Please Wait" window while the test is in progress, as shown here.	Click for larger image
If you have an error in your bot configuration, you'll get an additonal popup with the error message. This is a sample of what the error message popup will say - there will be different errors depending on the configuration issue, and the selected bot.	Click for larger image
If the test of your configuration was a success, you will see this message.	Click for larger image
Clicking "OK" on the Success screen will automatically take you back to the main bots page, with your newly configured bot appearing in the list. An example of a list of bots may be seen in this image.	Click for larger image

Using CasperLet Bots on a Per-Unit Basis

---

Steps to perform	Reference Image
Adding a bot on a per-unit basis requires the bot to already be set up. You should see a list of bots if this has already been done, similar to this reference image. If you have no bots in the list, you need to create your bot(s).	Click for larger image
Edit the individual unit configuration, and scroll down until you get to the "Group Invite Bots" line.	Click for larger image
Use the pulldown to find the display/label name of your bot to use for group invites from this rental unit, and click the "Add" button.	Click for larger image