CasperLet/FAQ

Copies

Q. I made a new alt / forgot my passwoord / (etc.) - can I get a copy of CasperLet on my new avatar?

A. CasperLet is non-transferrable. Your new avatar will need to purchase a new copy.

Q. SL ate my inventory! Can I get a fresh copy?

A. Sure! Just click a redelivery terminal and get it redelivered. If you use the one at the CasperTech store all the CasperTech purchases (including CasperLet) will be sorted to the top.

Website Issues

Q. I can't find where to run a website scan?

A. There are links on the overview page, and the regions page, once you log in.

Q. I reset my rental boxes and now I'm seeing TWO of everything! I tried a rescan but they're still there...

A1. The act of resetting rental boxes does not cause duplicates to appear on the website. If there are duplicates showing, it means there were others rezzed previously that were manually deleted, instead of deleted via the touch/click menu. Use the web scan to remove the duplicates.

A2. The rescan is automatically started after you click "schedule a rescan", but it can take "a while" to complete. The time it takes varies greatly, depending on how many rental boxes you have out, on how many sims/regions, and how fast the sims/regions are responding to the website query (if they're responding).

"Missing Unit" Issues

Q. The UpgradeBee is giving me these messages:

8) UpgradeBee CASPERLET ONLY v1.21: 7 units found which are eligible for update.

8) UpgradeBee CASPERLET ONLY v1.21: Upgrade cycle complete. Out of 7 units attempted, 0 were upgraded successfully. 7 units no longer exist on the region, and 0 weren't upgraded because they couldn't be contacted.

A1. The UpgradeBee does not clear out units which have been deleted. You will need to run a website scan to actually flush the deleted ones off the list.

A2. The web scan only removes units which are currently NOT contactable. This may be because they were deleted, or because of sim/region communication issues (which is an SL grid issue, not a CasperLet-specific issue.) Units which are still inworld will be re-added to the website list when they next become active. "Active" is defined as either clicking to get a popup menu, or a renter paying the unit to start a rental.

Payments & Pay Buttons

Q. Is there a configuration option to add proxy payments?

A. There is no special configuration for it - all rental boxes / meters accept proxy payments by default. In fact, as of May 28, 2013, all boxes / meters will accept these proxy payments without waiting for a confirmation from the user.

Q. Does CasperLet support split payments?

A1. Yes - all splits have to be set up via the website, however all splits needs to be set up individually - there's no bulk options for split payments.

Q. The payment went through to me - but it did not register on the meter, or the website.

A1. Check to be sure scripts are not disabled on that parcel.

A2. 1.20 or older: If payments are made within 6 seconds of each other, this will happen. If this happens to you, upgrade to 1.21 or newer, and talk to Casper directly to fix.

Q. After clicking the "evict & refund" button, the refund was not for the total rental paid - why?

A. Casper Warden writes: "Refunds are issued pro-rata." This means that some amount is deducted from the refund to account for the time between when the unit was rented, and time the refund was issued, even if it was just a couple minutes.

Q. I can't get the meter to show all 4 payment buttons...

A1. Have you set all four prices?

A2. Make sure you set the days to an amount other than 0.0, and untick/uncheck "hide".

Q. Pay buttons are showing amounts that are WAY more than what I entered!

A1. Base price per time period is set in the "price" line of the meter's configuration page. As of the time this portion was written, this is the 8th line down. The base price is multiplied by the "pay buttons" line further down.

A2. Common error points:

1. Did you put in actual linden amounts in the "pay buttons" boxes? (If so, this will multiply the "price" line by the actual price...)
2. Did you tick the box for "US Dollars"? (If so, that will convert the amount you entered FROM US Dollars TO Linden Dollars - and the pay buttons inworld will show prices hundreds of times what you originally entered.)
3. Did you make sure the dropdown selections under "Price" and "Pay Buttons" match? i.e., week and week, day and day, etc.

Q. I've got a customer who's complaining that he had 3 days, 6 hours, 36 minutes and 40 second life, before he paid 4 weeks, and now he has 1 month, 20 hours, 7 minutes, and 29 seconds. What's up with that?

A1. Calculations USED TO BE 2629744 seconds, which is the average number of seconds in a month. " The math worked out to apx. 30.43 days. This has since been fixed to calculate time based on the ACTUAL calender month, so you should NO LONGER see this issue.

A2. If you still do, first...upgrade your rental meters/boxes. Then if the issue is still happening, send an IM Casper Warden and let him know. (If you get an email autoresponse back a few minutes later, fill out the form at the weblink provided in the autoresponse - otherwise his IM's will cap, and your message will be lost.)

Q. How far in advance can we allow renters to pay?

A. Casper Warden writes: "There's no limit." You can allow tenants to pay as far ahead as YOU want.

Q. I have a tenant that went into arrears, but it won't let her pay, it keeps giving them money back and won't give them an option to pay more. There's no blank window to fill in a different payment amount.

A. UN-tick the box for "fixed payments" on the meter configuration page - this is preventing the tentant from paying extra to cover the arrears amount.

Q. I'm trying to reserve a rental unit for someone, but it won't let them pay - they're not getting a "pay" option at all?

A1. Make sure the name it's reserved for is spelled correctly - and is their actual ACCOUNT name, not their display name.

A2. Make sure you didn't accidentally "lock" it instead.

A3. Make sure "accept payments" is set to Yes

A4. Make sure it's not set to L$0 - LSL scripts cannot accept a 0 value as valid.

A5. Make sure you don't have a "." between their first and last names

Management Issues

Q. Why am I getting two emails when someone rents from me?

A. You quite likely have:

• Both IM and Email notifications enabled
• IM's forwarded to email when offline

Just disable one of them to avoid getting duplicates. The inworld notification comes with a clickable link to the new renter's inworld profile, the email one does not.

Q. Why can't I use the in-viewer built-in browser?

A. Casper Warden writes: "The built-in browser is pretty terrible - I wouldn't recommend using it, ever. It trims URL's, doesn't render javascript properly, and is generally broken."

Q. My manager isn't receiving notifications of time remaining on rentals - how come?

A. It can be for any of the following reasons:

1. Their avatar isn't added to the CasperLet account as manager
2. It was missed in local chat (they need to look in their local chat buffer)
3. They may not have received it yet if you JUST received yours (They may arrive a few minutes apart)
4. Sometimes object IM's don't reach the target user - IM's in SL are (currently) simply not reliable
5. They may have turned off receiving notifications
6. They may have been in mid-teleport when the message arrived to them.

Q. Can you set up the system to email you when someone rents a property? Where do I find the settings?

A1. When you configure a unit, these are the options you need to look at:

• Notify staff when a new tenancy starts
• Send notifications to the master avatar
• Send notifications by email

A2. If need your managers to get notificated then check this option:

• Send notifications to managers

Q. How do you add managers to the rental system?

A1. Have the user register an account at https://let.casperdns.com/ (It will be helpful, and MUCH easier to find them if they make their CasperDNS account name match their SL account name, but they should never use the same password that they use for SL....)

A2. Once they're registered:

• Go to the "Managers" tab
• Click "Add Manager"
• Add their CASPERDNS account name

Q. But when I try to add a manager, and they try to log in, it tells them they need to buy their own copy?

A1. That's because you tried to add them as a master avatar on CasperLet. Don't do that. There are SPECIFIC warnings that you should have seen, that specifically warn AGAINST that.

A2. Send an IM to Casper Warden - he needs to undo something in the system after you get that message to allow you to add them as just a manager.

Q. I had a [third party] account on one avatar, but we want to combine multiple rental owners onto a single CasperLet solution. Is there any way to use the migration tool across all accounts?

A. Casper Warden writes: "If you purchase casperlet on the other accounts too, then the migration tool can convert them all... and you can add all accounts to the same CasperLet account so it can all be managed from one place. That's the only way right now because the casperlet script is no transfer."

Q. Rental boxes are empty on website and inworld, but there should be tenants paid and current. Nothing has been deleted, nor have there been accidental deletions.

A. You can restore your tenant data by using the Emergency Restore option.

Q. How do I set my rental boxes to send reminder notices to tenants who have upcoming rent due?

A. Rental boxes will do that by default, unless notices are disabled.

A2. You should get a message IF a tenant has disabled reminders. Once they leave, and before the unit is rented again, the website will display a yellow message of "the previous tenant has disabled reminders". It will also display this message when the tenant has chosen "won't renew" because that also disables reminders. These messages will still be there once the unit becomes available - but once the unit is rented again, those messages will disappear from the website.

Q. Is there a "mass edit" feature on the website for the rentals or the profit sharing?

A. Yes there is.

Q. If I have several rentboxes and need to change the notecard inside them, do I have to change it manually in every box, or is there a way to change it for all of them at once?

A1. In older versions (1.19 or older), you have to change notecards manually in every box or rental meter.

A2a. Version 1.20+ - Remote notecard functionality (sending from a dropbox) is available in this version and up. If you have an older version, you can get the latest from a redelivery terminal. (If you use the one at Casper's shop, it will sort your CasperTech purchases to the top of the list.)

A2b. Version 1.20+ - if you have a manager for your rentals, and you want them to be able to change notecards, you will need to give them a copy of the notecards to put in THEIR own dropbox - they will NOT be able to see anything in YOUR dropbox (this is an SL limitation, and not something CasperLet can be scripted to work around.) How does this work, exactly?

Q. If I want to move my land tier rental boxes from each parcel of land and place them all in one central skybox elsewhere...how do I do it?

A1. Safe way: Go into edit move and move them - INWORLD - manually. "Wear" or "Attach" the units to your av, go to the new location, then right-click and DROP at the new location. Do NOT use "detach" as that will take it into your inventory, and they'll lose their configuration.

A2. You can't "take" them into inventory, they'll lose the rental information!

Tenant Issues

Q. How do I change the tenant's name on the box? Say for example if X person rented it, but then wanted it to be in Y person's name?

A1. On the website you can remove one tenant and add another, BUT you will lose the time and have to reset it for the replacement tenant, if they're supposed to keep the time.

A2. You can also add the additional name(s) as additional tenant(s) which will give the regular rights of a regular tenant. Just be aware that all added tenants are "SECONDARY" tenants - so if the primary tenant gets booted/evicted/etc., *ALL* the secondaries are booted/evicted/etc. as well.

Q. I was trying to move a tenant from one parcel to another, but it actually deleted the customer's rental and didn't give me the option to move them to another unit.

A. Use the "emergency restore" function to put the tenant back on the original box, and then start over with using the Transfer feature.

Customisation

Q. I have a LOT of meters to configure, especially with customised states and positions. Is there a way to do this in bulk? Edit / Take a copy and rezzing isn't working.

A1. When you are doing "take a copy", you are cloning a meter. Currently, when rezzed, this makes it a NEW box, with NEW scripts - and NO memory of the permissions and preferences given to the original. This is why re-rezzing isn't working.

A2. You can, however, use the *menu* based Copy and Transfer functions:

1. Touch/click the existing unit
2. On the popup menu, select "Transfer", then "From"
3. Set the new unit in place
4. Touch/click the new unit
5. On the popup menu, select "Transfer", then "Copy To", then "All" (This copies all data from first unit, including configuration)
6. Repeat with each successive unit.

Prices can be set in bulk on the website after the configuration is all done.

Q. Does the CasperLet meter or rental box need to be on the same sim or parcel?

A. It has to be on the same sim/region, but not the same parcel. They will only control properties in the sim they're rezzed in. The mapper, for example, can't be placed in one HQ location, with the meter in a completely different sim/region.

Q. Why don't my rental boxes change textures from "In Use" to "Available" when they're available to rent?

A. This is because you removed the "box@" or "m@" portion of the description field. You can change or remove anything after the "box@" / "m@", (and in fact you also need something for text after the @ sign as well) but you MUST keep the "box@" / "m@" in there or the textures will not change properly.

Q. Can the units on the ground be renamed to reflect their position or parcel name on the sim/region?

A. Just rename them inworld - on the rental unit itself. Be sure to use the NAME field, not the "description" field! The website will pick up the names from inworld the next time it syncs.

Q. Is there a way to get the sim image to load up on the website?

A. It should update within 12 hours; if it doesn't, send an IM to Casper Warden for him to take a look and see why it's not loading.

Q. Can I make the rental boxes translucent?

A. The rental boxes, yes you can and have it save with the states. The rental meters, no, it will not happen automatically - you'll have to make the changes manually.

Q. Changing transparency / size isn't working with the mesh meters?

A. You can move the mesh meters, but can't change physical characteristics like size and transparency.

Q. How do I get rid of the hovertext / floaty text?

A1. If you don't want the unit to display hover/floaty text, add "notext" (WITHOUT quotes) to the description, after the @.

  For example: box@notext

A2. The per-unit configuration page also has a "Don't display text when unit is rented" tickbox.

A3. The bulk units page also has a tickbox for floaty text in the unit options block.

Q. Is there an "Evicted" state?

A. No there is not - the rental unit should automatically go back to an available status, and use the "available" state that you've already set. (If it doesn't, it's a bug - file a bug report @ Casper's bug ticketing system.