Scripts: Difference between revisions
No edit summary |
|||
| Line 34: | Line 34: | ||
|CasperVend||1||0.001||66kb||3971 | |CasperVend||1||0.001||66kb||3971 | ||
|} | |} | ||
==Holovendors== | |||
Certain types of operation are very taxing on sim resources. One of these operations is rezzing. | |||
Because of that, and despite their efficient design, our HoloVend vendors cause significantly more lag than regular vendors, when they are in use. When idle, they don't cause much lag at all. | |||
We don't recommend "temp rezzing" (zero-prim rezzing) under ANY circumstances. It's one of the worst things you can do lag-wise. | |||
==Your region== | ==Your region== | ||
Revision as of 14:22, 14 June 2014
Most people know that CasperVend uses only one script in all its vendor units and dropboxes. But how important is this, really?
Script Time
A region runs at approximately 45 frames per second when it's not lagged. This allows roughly 22ms *total* script time per region.
CasperVend vendors run at roughly 0.001 - 0.002ms of script time per frame. This means you could theoretically have 11,000 of our vendors rezzed without experiencing lag.
Script Memory
Another factor is script memory. A simulator has 256mb of script memory, and each of our vendors uses 66kb. This means that we would run out of memory after 3971 vendors were rezzed, so that is our actual limit.
How many vendors can I run without causing lag?
We rezzed vendors from these companies and left them for 30 minutes (for the script time to settle). Results:
| System | Script count (multivendors) | Script time | Script mem | Max # of vendors with no lag |
|---|---|---|---|---|
| HippoVend | 10 | 0.016 | 655kb | 400 |
| Alika | 3 | 0.002 | 197kb | 1330 |
| BSM | 2 | 0.003 | 131kb | 2001 |
| HippoVend "Elite" | 1 | 0.002 | 66kb | 3971 |
| CasperVend | 1 | 0.001 | 66kb | 3971 |
Holovendors
Certain types of operation are very taxing on sim resources. One of these operations is rezzing.
Because of that, and despite their efficient design, our HoloVend vendors cause significantly more lag than regular vendors, when they are in use. When idle, they don't cause much lag at all.
We don't recommend "temp rezzing" (zero-prim rezzing) under ANY circumstances. It's one of the worst things you can do lag-wise.
Your region
Of course, these numbers assume you have *no other scripts* rezzed on sim, but this is never the case. In order to properly calculate how many CasperVend vendors you can rez before you see any lag, go to:
World -> Region/Estate -> Debug -> Get Top Scripts
Refresh this a few times, and note the *maximum* number at the top, for example, mine says:
"539 scripts taking a total of 1.685ms."
Mutiply the script count by 66kb and you have the rough memory usage - in my case, it's 34496kb (or 33mb), so I have 223mb available to use - enough for around 3,500 CasperVend vendors. Subtract the script time from 22 and you have the amount of script time you have available to play with. In my case I have 20.315ms available, which is easily enough for the 3,500 vendors (it could support 20,000 of them).