Clearing Vendors: Difference between revisions

From CasperTech Wiki
Jump to navigation Jump to search
 
(42 intermediate revisions by 4 users not shown)
Line 1: Line 1:
== '''<span style="color:#00528c">Rental Units on Website That Shouldn't Be? </span>'''==
This is normal if a rental unit has been Edit > Deleted out of the world without using the popup "delete" option, or if the unit(s) have been sent back to your lost and found.


There are two ways to fix this:  
{|align=right
# Use the website "Scan" function ('''Only click it ONCE''', and be prepared to wait a while, likely a few hours, depending on the system load.)
  |__TOC__
# Go into "Units" tab, tick the boxes for each rental unit that shouldn't be there, then select "Delete".  
  |}
[[File:German_flag.gif]] [[Website_Scans/DE | Schaue hier in Deutsch!]]
= '''<span style="color:#00528c">Vendors Missing From List</span>'''=
 
== Why Do Vendors Drop Off The List? ==
:They drop off the list due to bad communication issues between Casper's servers and the SL grid. The "HTTP-IN" problem - as '''[[CasperVend_2/Events | Casper explained here]]''' - is the reason they drop off. When Casper's servers cannot CURRENTLY contact one or more vendors, then naturally it remove any and all vendors that it cannot currently get communications from.
 
:HTTP-OUT is working much more reliably - this is why a vendor will pop back ON the list when it is used, and why simply not seeing a vendor in the website list, does '''not''' impact their functionality inworld.
 
:If you need to clear off old vendors, it is best to use an UpgradeBee - either for VENDORS ONLY or DROPBOXES ONLY - on "check all". This '''MUST''' be done on EACH sim/region you have/had vendors on. If you can no longer rez there, you may wear the UpgradeBee instead, it will still function.
 
== Are some of your vendors missing in the list?==
:Vendors can be missing from the web because they are in a standby mode for a very long period of time, OR when sim/region-to-outside-web communications are not as good as they should be. This also happens by default when the sim has no visitors for a long period of time. It's therefore common for vendors to drop off the list - this is considered normal and not a problem, and the vendors will reappear on the list the next time they are used. After a sim/region has been restarted - such as on weekly "rolling restart" days - it takes time for all vendors and/or rental units to communicate with the website '''and''' provide their new URL (it changes after every sim restart).


The scan function does '''NOT''' add units to the website list. Rental units will pop back up when they are contactable again, or when you or a customer clicks them and uses one of the functions.
:'''This will NOT cause problems with deliveries or purchases!'''


=== Checking status of "Scan" function ===
:If you are concerned about whether they will appear on the list, click each missing vendor and use the "Admin" option in the popup menu.
----
# Log in to CasperLet
# Click "Job Lots" - you'll see a list of all the scans you've tried to run.  


You '''should''' have only one listed - if you have several, it will exponentially increase the amount of time it takes for the site to check the rental units....again and again and again and again.
== Trying to Manage/Edit Vendors Not On The List? ==
:They can still be managed! Just do the following steps:


:# Click the vendor inworld
:# Select "Admin" from the popup menu
:# Let the next popup option take you to the website
:# You'll arrive at the vendor's individual configuration page!


=== "Not Authorized" message when trying to scan ===
= '''<span style="color:#00528c">Clearing Off Deleted Vendors</span>'''=
----
This may happen when you have manager (or higher) access to more than one copy of the CasperLet system. When the system is told to begin a scan, it will attempt to scan for ALL accessible copies of the systems. When one or more of them fails, you get an error message like the following:


  '''''Couldn't schedule a scan for units owned by ((number)) avatar(s) due to insufficient permissions'''''
== Vendors On Website That Shouldn't Be? ==
This is normal if a vendor has been Edit > Deleted out of the world without using the popup "delete" option, or if the vendor(s) have been sent back to your lost and found.


The system(s) that you DO have scan access for, will allow the scan to run, even though the error message comes out for the ones you can't run the scan on.
There are two ways to fix this:
# Use the VENDORS UpgradeBee on "Check All" (do '''NOT''' use "force" for this!), in '''EVERY''' sim/reigon has has extra vendors showing.
# On the website, go into "Manage" on each vendor that shouldn't be there, and click "Delete" from THAT vendor's configuration page.  


=== Important Note ===
As long as you can teleport to the sim/region, you can still run the Bee - just WEAR it, instead of rezzing it, and proceed as you normally would.  
----
Please note: '''NONE''' of these methods will force a rental unit to suddenly appear on the website. These methods will only REMOVE rental units from the site list that are not currently contactable.


This may remove rental units from the list that are still inworld - this is normal, if they're not currently able to be seen (due to sim/region-to-website communication issues) - they '''will return''' once they are actually used inworld.
If you no longer have access to a sim/region that still shows your vendors, send in a ticket: send an IM to "CasperHelp Resident" for a web link, and fill out the form, including the SLURL to the sim/region (or at least the region name) so it can be taken care of.

Latest revision as of 16:39, 6 May 2023

Schaue hier in Deutsch!

Vendors Missing From List

Why Do Vendors Drop Off The List?

They drop off the list due to bad communication issues between Casper's servers and the SL grid. The "HTTP-IN" problem - as Casper explained here - is the reason they drop off. When Casper's servers cannot CURRENTLY contact one or more vendors, then naturally it remove any and all vendors that it cannot currently get communications from.
HTTP-OUT is working much more reliably - this is why a vendor will pop back ON the list when it is used, and why simply not seeing a vendor in the website list, does not impact their functionality inworld.
If you need to clear off old vendors, it is best to use an UpgradeBee - either for VENDORS ONLY or DROPBOXES ONLY - on "check all". This MUST be done on EACH sim/region you have/had vendors on. If you can no longer rez there, you may wear the UpgradeBee instead, it will still function.

Are some of your vendors missing in the list?

Vendors can be missing from the web because they are in a standby mode for a very long period of time, OR when sim/region-to-outside-web communications are not as good as they should be. This also happens by default when the sim has no visitors for a long period of time. It's therefore common for vendors to drop off the list - this is considered normal and not a problem, and the vendors will reappear on the list the next time they are used. After a sim/region has been restarted - such as on weekly "rolling restart" days - it takes time for all vendors and/or rental units to communicate with the website and provide their new URL (it changes after every sim restart).
This will NOT cause problems with deliveries or purchases!
If you are concerned about whether they will appear on the list, click each missing vendor and use the "Admin" option in the popup menu.

Trying to Manage/Edit Vendors Not On The List?

They can still be managed! Just do the following steps:
  1. Click the vendor inworld
  2. Select "Admin" from the popup menu
  3. Let the next popup option take you to the website
  4. You'll arrive at the vendor's individual configuration page!

Clearing Off Deleted Vendors

Vendors On Website That Shouldn't Be?

This is normal if a vendor has been Edit > Deleted out of the world without using the popup "delete" option, or if the vendor(s) have been sent back to your lost and found.

There are two ways to fix this:

  1. Use the VENDORS UpgradeBee on "Check All" (do NOT use "force" for this!), in EVERY sim/reigon has has extra vendors showing.
  2. On the website, go into "Manage" on each vendor that shouldn't be there, and click "Delete" from THAT vendor's configuration page.

As long as you can teleport to the sim/region, you can still run the Bee - just WEAR it, instead of rezzing it, and proceed as you normally would.

If you no longer have access to a sim/region that still shows your vendors, send in a ticket: send an IM to "CasperHelp Resident" for a web link, and fill out the form, including the SLURL to the sim/region (or at least the region name) so it can be taken care of.

Retrieved from "https://wiki.casperdns.com/index.php?title=Clearing_Vendors&oldid=15316"