CasperSafe Security Orb

From CasperTech Wiki
Jump to navigation Jump to search
This is only a draft - the product is in ALPHA TESTING only right now

Features

  • No notecards to edit!
  • Fewer scripts! Only 4 scripts instead of 11-13 scripts!
  • Configuration is a snap!
  • ((insert moar features))

What's in the Box?

The following named items are in the shipping crate:

CasperSafe Enforcer
CasperSafe Parcel Link Tool
CasperSafe Psychic Link Script (Read the instructions!)
CasperSafe Security Orb

Along with a landmark to the CasperTech store.

Initial Menu

((Picture to be inserted later))

Arm
Link
Areas
Access
Options
Visitor

When the unit is armed, you will also have an extra "lockdown" option.

When the unit is disarmed, it automatically runs in "discreet mode" to save on region resources.

Access Levels


ADMIN - This is the system owner, and any defined managers/co-admins.
SUBADMIN - This is the primary tenant + any additional tenants.

Tenants/Subadmins can access everything except the LINK and AREAS options, and can't change the ADMIN access list.

Areas


This option defines what area(s) you want CasperSafe to protect.

The area options are:

* Custom
* Range
* Parcel
* Region

Custom


Choosing custom will rez out a red and blue pair of arrows, which are used to define the diagonally opposite corners of a square or rectangular space. If the parcel you are trying to protect is non-square and non-rectangular, it might be more effective to use the "parcel" setting instead of "custom".

Range


Range allows you to define a circular radius of protection. This may be any number of distance in meters, up to the size of the sim/region.

Parcel


Allows you to protect a specific parcel on a region.

Region


Allows you to protect an entire region.

Link


This starts the pairing process between CasperSafe and the rental unit. If you clicked this by mistake, simply wait a minute or two for the process to time out. When you see the "Paring ended" message, you can go back to doing what you were trying to do.

CasperSafe Enforcer

This is the widget that actually does the ejecting / teleport home functions. Thus it is required if you actually want to be able to boot avatars out of the protected area - Otherwise CasperSafe operates in "Warning Mode" which basically nags the avatars instead.

Like the CasperLet Prim Counter, in order to properly function, the Enforcer widget must be owned BY THE LANDOWNER - so if the land is owned by an individual, that individual must rez out the Enforcer. If the land is owned by a group, the Enforcer must be rezzed under the land group tag, and then deeded to the group. If there are multiple land owners, then you'll need one Enforcer per land owner.

The Enforcer is copy and transfer to enable it to be given to, or deeded to, the appropriate land owners.

Default Settings

These are the default settings for the options menu, as it ships from CasperTech: ((Picture to be inserted later))

Floaty text - OFF - This controls the radar
Disallow by default - OFF - Eject anyone not in the access list
Discreet mode - OFF - Slows down the timers to be kinder to region resources
Eject mode - OFF
Teleport home - OFF
Add to parcel ban list - OFF
Warning time: 30 seconds - How long avatar can stay before being ejected
Age limit: NONE
Script limit: NONE

If an avatar is added to the parcel ban list, they will remain on the parcel ban for 6 hours, after which that avatar will be removed from the parcel ban list.

If Eject Mode is ON, then banned avatars will be ejected immediately.

Automatic Settings


* When used with CasperLet, the owner and any CasperLet managers are automatically admins
* When used with CasperLet, the primary tenant + additional tenants on that rental are added automatically to the SUBADMIN access list.
* Two CasperTech support avatars are added to the whitelist to make it easier to provide any needed support: Casper Warden and CasperHelp Resident.
* Lockdown mode automatically ends when the protected area is empty of all allowed avatars.

Warning time


This controls how long the avatar can stay before being ejected, if eject mode is on. In "Warning mode" (which is the default, if there is no Enforcer present and/or properly deeded) this is how long before CasperSafe sends another warning to the intruding avatar.

Banned avatars


Any avatar on the ban list (either in CasperSafe or on the land) will be ejected immediately if Eject Mode is on.

Lockdown mode


When CasperSafe is armed, the base menu will also show the option "Lockdown" - this changes the warning time to 10 seconds (reduced from the normal minimum of 20 seconds), and increases the scan frequency in order to detect possible threats more quickly. This automatically disables itself when everyone ON the access list has left the region.

There is no time limit beyond waiting for all the admins/subadmins/allowed guests to leave the protected area.

Note that Lockdown mode uses slightly more script time than normal operation (see "Script Times" below).

Pairing Mode

Pairing CasperSafe to a single Rental Unit


NOTE: CasperSafe may be paired with only ONE rental unit. If you have multiple rental units out, AND you want to pair CasperSafe to the units, you'll need one CasperSafe per unit.

1) Rez CasperSafe Security Orb near the rental unit
2) Drop the "Psychic Link Script" into the corresponding rental unit
3) Watch messages in local chat. If all goes well, you should see:
  Okay, let's have a look here..
  Ooh, CasperLet! Good choice! Searching for the orb..
  Cool! I'm paired with ((name of rental unit)) (Key: ((uuid string)) )
  Pairing process ended. 
4) The orb will also add the CasperSafe system owner as an ADMIN automatically.

Pairing process usually takes 1-2 minutes, but may be longer if the region is heavily lagged.

Pairing CasperSafe to a Parcel


The Parcel Link Tool allows CasperSafe to be paired with one or more parcels. The Parcel Link Tool must be used on the parcel that will be linked to the CasperSafe orb. It can be rezzed on any parcel and moved over, just be sure to allow a minute or two for it to pick up the change in parcels.

1) Rez the CasperSafe Security Orb on the land you want it to monitor
2) Rez the "Parcel Link Tool" - You will get these messages in local chat:
  Touch me to pair this parcel with your CasperSafe orb. 
  Make sure you have started pairing on the orb by choosing AREA -> ADD -> PARCEL, first.
  I'm now over parcel ((parcel name as seen in "about land" floater)). Touch to register with a CasperSafe Orb.
3) On the CasperSafe orb, click for the popup menu
4) Select "Areas"
5) Select "Add"
5) Select "Parcel"
6) Then click the Parcel Link Tool. You'll see the following messages in local chat:
  OK. Trying to find a CasperSafe orb, please stand by.
  Alright, all done!
  Pairing process ended.
7) The Parcel Link Tool will self-delete when the parcel pairing process is completed.

Pairing process usually takes 1-2 minutes, but may be longer if the region is heavily lagged.

Not Supported

Height restrictions

CasperSafe does not support any sort of avatar height restriction. Since the introduction of mesh avatars, you can no longer depend on avatar height as being a psuedo-reliable indicator of the avatar's "age". There are many non-child avatars that are also short, and non-human avatars can come in many sizes as well. Height restrictions are therefore irrelevant today, and would eliminate too many legitimate avatars.

Instant ban / Short warning duration

Ever been randomly teleported home by an over-zealous security system? Yes, us too. It really sucks.

That's why CasperSafe is designed to be fair. Security devices which are set to less than 10 seconds do not provide amble opportunity for passer-bys to vacate the area.

The minimum warning time is 20 seconds under normal operation. However, if you require extra privacy, you can enable "Lockdown" mode which temporarily reduces the warning period to 10 seconds.

For the above reason, we don't support an "instant" eject mode. However, those who are on the "Ban" list will be ejected instantly.

Script Times

These timings were measured over a 24 hour period. Your mileage may vary, and times may be higher on busy sims.

UNARMED - 0.003ms
DISCREET - 0.003ms
ARMED - 0.004ms
LOCKDOWN - 0.005ms
ARMED + RADAR - 0.006ms
LOCKDOWN + RADAR - 0.007ms

Still Need to Know....

1) How to use with other supported rental systems?

2) How menus appear between owner and additional managers