CasperVend 2/Setup: Difference between revisions

From CasperTech Wiki
Jump to navigation Jump to search
Line 333: Line 333:
----
----
Vendors can be missing from the web because they are in a standby mode for a very long period of time, OR when sim/region-to-outside-web communications are not as good as they should be. This also happens by default when the sim has no visitors for a long period of time. It's therefore common for vendors to drop off the list - this is considered normal and not a problem, and the vendors will reappear on the list the next time they are used.
Vendors can be missing from the web because they are in a standby mode for a very long period of time, OR when sim/region-to-outside-web communications are not as good as they should be. This also happens by default when the sim has no visitors for a long period of time. It's therefore common for vendors to drop off the list - this is considered normal and not a problem, and the vendors will reappear on the list the next time they are used.
'''This will NOT cause problems with deliveries or purchases!'''


If you are concerned about whether they will appear on the list, click each missing vendor and use the "Admin" option in the popup menu.  
If you are concerned about whether they will appear on the list, click each missing vendor and use the "Admin" option in the popup menu.  


There is no all-at-once method to return vendors to the list that have vanished due to idling.
There is no all-at-once method to return vendors to the list that have vanished due to idling.
'''This will NOT cause problems with deliveries or purchases!'''


=== Vendors On Website That Shouldn't Be? ===
=== Vendors On Website That Shouldn't Be? ===

Revision as of 09:11, 31 July 2014

CasperVend Manual

This is the main manual page for CasperVend. If you need it, the table of contents for this page is to the right.

If you are here to see what's involved with setting up the system before buying it, you might also be interested in seeing the Feature List and find out Whats in the Box, in addition to the instructions below.

The Fine Print

Prerequisites


The manual on this page assumes the following:

  1. That you understand the setup processes behind web-enabled networked vending systems
  2. That you understand debit permissions need to be granted in order for all scripted vendors to function
  3. That you have at least one product to sell
  4. That you have at least one promotional image for each product to sell
  5. If your product is in multiple pieces (such as an outfit), that you have put the product in a shipping package of some sort.

If any of these concepts are unclear, or you have never extensively used a web-enabled networked vending system before, you should begin at the New User Quick Start instead, where the instructions are simplified and explained for people who are not as familiar with these concepts.

Allowable vs. Non-Allowable Items


Any product which is permitted to be sold in the grid it's available for - according to the grid's Terms of Service - is also permitted to be sold via CasperVend.

While not exhaustive, some items which are explicitly not allowed include:

  • Any item(s) depicting or suggesting the abuse or sexual solicitation of minors
  • Any item(s) which are designed to defraud or commit a crime (or entice others to defraud or commit a crime)
  • Any item(s) which violate or are intended to violate or entice others to violate UK or international law
  • Any items which violate the grid's Terms of Service (sim crashers, object spammers, copybot tools and the like)

DMCA's


PLEASE NOTE: CasperTech is not in control of products for sale in CasperVend vendors, only the vending system which can access them - this means we are not in a position to comply with a DMCA notice (we cannot actually remove the content from the virtual world grid). Each merchant is responsible for ensuring that their products do not violate anyone else's copyrights.

DMCA takedowns need to be filed with the owners of the virtual world grid directly, as it is their system (the grid) which is actually serving the content. In the case of Second Life, the owners are Linden Lab.

Terminology


CasperTech (and thus CasperVend) does do a few things differently from other web-enabled networked vending systems. This manual uses the following terms that may not be used by other web-enabled networked vending systems:

  • DropBox - This is your product server. Your packaged products go in here, and are delivered to your customers from here.
  • Item - "Items" are the things you put inside your DropBox. "Items" can be your packaged products, informational notecards, landmarks, and so on.
  • Product / Product Listing - These are created on the website using your items, and each listing includes information about your product including price and permissions. All product settings are on one page for ease of setup.

Your Account

Security Notes


Protect your business by following these tips, and keep your account safe.

  • Choose a password which is difficult to guess.
  • Do NOT use your Second Life password.
  • Do NOT use a password you've used with any other Second Life related service, such as other vending systems.
  • Do NOT give your password to anyone!

If you have trouble coming up with a secure password on your own, you can use the Gibson Research High Security Password Generator.

If you need a "password keeper" utility on windows, you can try Password Safe

Creating Your Account


Before you can begin setting up products on the website, you need to have a CasperVend account. If you already have one, just log in.

Otherwise, rez out a CasperVend vendor of your choice, grant debit permissions, and then follow the instructions on the Creating Your CasperVend Account page.

Resetting Your Password


See the section on Resetting your CasperVend Password

Setting Up Products

Setting Up Your Dropboxes


See the DropBoxes page for important details and instructions on setting up your DropBoxes.

Set Up Product Listings


First, if you haven't already, rez a vendor and grant debit permissions.

Then:

  1. Click on the (C)asperVend logo in the bottom left hand corner of one of your vendors.
  2. Visit the link that appears in local chat, and enter your password if necessary.
  3. Now, click "Products" on the left hand side.
  4. Click "+ List New Product" to create a new product.
  5. Fill out details about your new product, then click Save.
  6. Pay attention to any menu/popup messages you receive - they have very important information!

If you are selling products that have a license the user needs to agree to, see the Product License page.

   Minimum Essential Product Information


  1. Item to be delivered
  2. Name of product
  3. Vendor picture for product
  4. Price of product
  5. Permissions for product (this controls whether redelivery is allowed)

To see details about the various product options, read the product options page.

Getting the picture UUID: Right-click on the vendor image in your inventory (it needs to be full perm TO YOU) and select "copy UUID".

   Listing Notes


You will note that it IS possible to set up a listing without delivering a product. This capability is useful for when you want to track sales but aren't vending something tangible that gets sent to the customer.

If the listing is not pointed TO the product, whether intentional or accidental, the transaction log will show the message:

 "No item configured on this product for delivery, so skipping delivery phase."

   New Version of Old Product


If you update an older product, just drop the new product in the vendor, and re-point product listing on the website to the new version.

Alternately, you can name the updated product to EXACTLY match the earlier version, delete the old version out of the dropbox, and replace it with the new version - and not have to edit the website listing at all.

Delivery Options


The default method is to use the scripted DropBox for all product deliveries.

If you are using a SmartBots Personal Bot, however, you can also take advantage of the bot delivery system. You are NOT REQUIRED to use a bot for delivery, but it is worth considering if you have products which are no-copy to the customer - the SmartBots bot delivery allows for a comfirmation of the product's arrival to the customer.

For information on using SmartBots for bot delivery, see the Bot Delivery page. (At this time, other bot systems do NOT offer the scripted feedback calls necessary for the bot delivery function.)

Product Permissions


One of the things the website asks for when you enter your product details is "permissions". Please be aware that this does not actually change the permissions set to your objects, but instead the information about the permissions will simply be told to the customer as an advisory.

In addition, any products which are set to COPY on the website will be claimable by customers as a redelivery - so be careful when setting this flag. See the redeliveries page for more information.

NOTE: The website cannot read or change permissions on anything you have in the dropbox. This is why it is CRITICAL to set your permissions properly on both your product AND the website.

  • If you are selling items which are no-copy to you, the merchant/owner, (such as breedable items) see the Limited Availability page.
  • If you are selling limited edition items (limited number on the grid, but merchant/owner has copy AND transfer permissions), see the Limited Edition page.

Set Up Product Variants (if desired/needed)


Here's how to set up a product variant:

1) Go to the product listing you want to make a variant OF.
2) Click "Add Variant", right above the blue PrimBay section.
3) To set up a product variant, add in the information for:
  • Name (of product, as will be shown in statistics)
  • Item (to be delivered) - use the pulldown to select the product. You may use the radio button for "only objects" to only show you product packages without also showing notecards, landmarks, etc.
  • Texture (the picture for the vendor)
  • Price
  • customer permissions (this controls whether it can be redelivered, and does NOT set permissions on anything in the DropBox.)

At this time any OTHER options you wish to have that are different from the parent product (such as limiting how many can be sold inworld, or a holo/demo of a specific variant) are NOT able to be done with a variant - these will need to used on a full separate product listing.

Repeat the above steps for each variant you want to add to the parent product.

If the variant already exists, you may use the additional options to:

  • Remove any existing marketplace association (if it was incorrectly associated)
  • Delete the variant
  • Detach the variant

Pros & Cons of Variants


Some merchants find it useful to list products as variants of a main product. Hair, clothing or shoes in different color packs can easily be set up as variants, or if you want to have a vendor picture display slightly different for an event, but do not want your main vendor location(s) to have the event-related picture.

Variants are currently (March 2014) treated as separate products everywhere BUT within the product listings. Each variant will have its own entry in your statistics (so you can track them separately), and may be added as individual items to different profiles and groups (so you can have all black shoes, all red shoes, etc.)

What Variants Can & Cannot Do


You are able to detach a variant to make the variant a full product with all options. however at this time you cannot turn a full-featured product into a variant of another.

You are able to point both a variant AND the primary product to the SAME product package in your DropBox.

Limited Items


CasperVend can handle items that are either limited in availability (no-copy items such as fish or breedables) as well as "limited editions" where you as the owner-merchant have both copy/transfer permissions, but you are only allowing a certain number to be sold on the grid.

For details on how to set up items which are no-copy to you, see the Limited Availability page.

For details on how to set up items which you, as the owner-merchant, have copy/transfer perms for, but are only allowing a limited number to be sold, see the Limited Edition page.

Giving Free Gifts To Customers Via Vendors


Set your product to L$0 on the product setup.

SL grid does not allow pay buttons to have L$0 as a cost, so the vendor always appears to charge L$1 - which it will then immediately refund. This is normal.

If you wish to work around this so that the customer doesn't even have to pay that L$1, then disable the touch/popup dialogue via the vendor's configuration page. After that, that product will deliver on a touch. Otherwise, customers are always able to click a vendor and use the "Deliver" option on the popup menu to get the free product.

Profiles & Groups


For information on how to group your products together and only show certain collections in certain vendors, see the Profiles & Groups page.

Bulk Updates (To Existing Products)


The bulk update block is located below the product listings. This cannot be used to "bulk list" new items - it is only designed to bulk-update products that have already had listings set up.

You can use this section to globally update things like textures, prices, etc. that will take effect on ALL products currently selected. If you have not ticked any boxes, or have not used the "all" option at the bottom of the list, changes you make in the bulk section will NOT actually happen.

Setting Up Vendors

When you first rez a particular vendor, you will be asked for debit permissions. All vendors need debit permissions in order to function, but you should always read the orange/yellow popup to make sure it's YOUR vendor.

See the Debit Permissions page for a detailed explanation.

Configuring Single-Product Vendors


For vendors which are designed to show only one product, there is a shortcut you can use to quickly configure them.

  1. Rez the vendor
  2. Grant debit permissions (the vendor won't function without them)
  3. Access the vendor configuration page, by clicking the (C)asperVend logo in the bottom left hand corner of the vendor.
  4. Look for the configuration option called "Single Product"
  5. Simply switch the Single Product pulldown selector to the product you wish to show.

Once you have configured the basics on any vendor, you can shift-drag them in "edit" mode and they will keep the configuration from the original vendor (group settings, affiliate percentages, etc.) - you will still need to answer debit permissions for the new copy, of course, but the only other thing you'll need to do is change the single product that is assigned to it.

Configuring Multi-Product Vendors To Show Specific Products


For scrolling, multi-product vendors, you need to create a full profile. See the Profiles & Groups page for more details and instructions on how to do this.

  1. Rez the vendor
  2. Grant debit permissions (the vendor won't function without them)
  3. Access the vendor configuration page, by clicking the (C)asperVend logo in the bottom left hand corner of the vendor.
  4. Look for the configuration options labelled "Actions"
  5. Under Actions, look for "New Profile", and click it.
  6. Give your profile a name, and click "Create". You'll be taken to a screen with two white boxes.
  7. Select a product from the left white box that you want to show in the vendor, and click the [-->] button. This will add the product to the profile. Repeat with each additional product you want in the profile.
    NOTE: There is currently no way to select only some of the products. You can only move one at a time, or move them all at once, nothing in between.
  8. When you're done, click "Finish".

The profile will be saved and will be applied to your vendor within a couple minutes!

Once you have configured the basics on any vendor, you can shift-drag them in "edit" mode and they will keep the configuration from the original vendor (group settings, affiliate percentages, etc.) - you will still need to answer debit permissions for the new copy, of course, but the only other thing you'll need to do is change the profile that is assigned to it.

Why is the Same Product in all Panels?


CasperVend doesn't show "empty" panels like some other vending systems do. If you have fewer products set up than you have panels on the vendor, then you will see some/all of the products repeated multiple times to fill the vendor panels. This is normal.

Turning a Non-Vendor Object Into a Vendor


Caveat: This is NOT recommended for furniture that gets sat on - the vendor script will soft-reset anytime an avatar sits or unsits, since LSL sees the act of "sitting" and reads it as a change in the linkset. We recommend the HoloVend expansion to display furniture instead. (If you purchased the Fat Pack, then HoloVend is already included.)

  1. Take the vendor script AND "mapping" notecard out of the headless vendor into your inventory
  2. Drop the script and notecard from your inventory into your product
  3. Grant debit permissions (the vendor won't function without them)
  4. Click the object, and select "Admin"
  5. Log in to the website, if necessary
  6. You will be taken to the configuration page for that vendor product
  7. Change your options as desired
  8. All set!

Set Up Multiple Locations, Fast


  1. "Take A Copy" of the appropriate vendors from your main store
  2. Rez them at the new location
  3. Slide into place
  4. Done! Yes, it's THAT easy!

By taking copies of vendors you have already granted debit permissions to, you don't have to answer even more debit permissions windows at the new location(s).

"Search" Option On Vendors


The "Search" feature on the multi-product vendors allows the customer to search within the products ON that vendor - searching what's in that vendor's profile - to see if anything matches the search term(s) they enter. The keywords section on each product listing contributes to what can be found using this feature.

"Search" is a profile function, not a vendor function - so if you have a profile set to a single-item static vendor, you will still have "search" as an option in the popup menu when clicking the vendor, even if you only have one item in the profile.

This feature, of course, has no impact on inworld SL land search. You will need to set up your own keyword prims if you want to have any effect on your shop's ability to be found in the inworld SL search.

Affiliate Vendors


CasperVend allows you to set up affiliate vendors without having to buy an extra expansion pack! See the Affiliate Setup page for details and instructions.

If you have already set up affiliate vendors for your products, and you want to give your affiliates instructions and information about them, see the Information For Affiliates page instead.

Showing Products in "Pages"


This is generally not recommended, because it this is non-standard behavior for CasperVend vendors, and some customers may be confused by the paging function when they expect the normal scrolling.

Also, this only works with vendors 2.09 and up.

  1. Log into CasperVend
  2. Click "Profiles"
  3. Edit the profile you want to have show products as pages
  4. Tick the box for "Generate profiles as pages...."

Make sure you ONLY use vendors with the same panels as what you select in the numbered pulldown in this option for that profile! If you use a vendor with fewer panels than you have set in this option, some products will never be seen!

More Vendor Options


Customising Your Vendors: To learn how to customise your vendors, see the Customisation page for details
Sounds: To play/sell sounds on a vendor, see the Sounds page
Quantity: To sell a quantity of items, such as fish bail, see the QuantityVend page
Textures: To sell textures, you will also need the TextureVend expansion pack.
Video: To show videos with a product, see the Video Playback page

Vending Management

CSR Contact Points


  1. Go to the "Overview" tab on the CasperVend website
  2. Add your CSR's account name in the CSR box
  3. Click the "Save CSR" button
  4. Done!

If you add just one individual's name, the message that gets sent to the customer will include a link to the CSR's inworld profile.

Multiple CSR's and other tricks


To add multiple CSR's, simply add all the account names, separated by a comma, in the CSR box. The message that gets sent to the customer will include ALL the names, but will NOT include any profile links.

You may, instead, add a web address (for a contact form) or a SLURL (for a customer service center) instead, if you wish.

CSR Limitations


Currently, CSR's are ONLY a contact point for your customers (for tech support, etc.) - they CANNOT do anything with your CasperVend products.

Redeliveries (when your products are copiable) are handled by the customers themselves with a redelivery terminal, which your CSR's can lead the customer to.

Group Invites (Automatic)


To be able to automatically invite users to your customer group with each purchase, start at the Group Bots page and select the page or section that deals with the bot you are currently using.

Holo / Rezzing Demos


See the HoloVend page for information and instructions.

Managers in CasperVend


Currently, there is no facility in CasperVend for managers that do anything with your products under their own login. For security reasons, we do NOT recommend sharing your CasperVend account passwords, as that gives unrestricted access to your products. CasperTech is not responsible for what someone else does with your CasperVend account!

The managerial feature is slated to be added to the future version of the CasperVend website. If you wish to be notified when this feature is added, click the "Monitor" button on this ticket. Simply replying on the ticket won't keep you updated.

Missing Vendors In Website List?


Vendors can be missing from the web because they are in a standby mode for a very long period of time, OR when sim/region-to-outside-web communications are not as good as they should be. This also happens by default when the sim has no visitors for a long period of time. It's therefore common for vendors to drop off the list - this is considered normal and not a problem, and the vendors will reappear on the list the next time they are used.

This will NOT cause problems with deliveries or purchases!

If you are concerned about whether they will appear on the list, click each missing vendor and use the "Admin" option in the popup menu.

There is no all-at-once method to return vendors to the list that have vanished due to idling.

Vendors On Website That Shouldn't Be?


This is normal if a vendor has been Edit > Deleted out of the world without using the popup "delete" option, or if the vendor(s) have been sent back to your lost and found.

There are three ways to fix this:

  1. Use the UpgradeBee on "Check All" (do NOT use "force" for this!), in EVERY sim/reigon has has extra vendors showing.
  2. Use the website "Scan" function (Only click it ONCE, and be prepared to wait a while, likely a few hours, depending on the system load.)
  3. Go into "Manage" on each vendor that shouldn't be there, and click "Delete" from the vendor's configuration page.

Please note: NONE of these methods will force a vendor to suddenly appear on the website. These methods will only REMOVE vendors from the site list that shouldn't be there.

What Website Scan Does / Does Not Do


The website scan - and the "Check All" feature of the UpgradeBees - will only remove vendors that no longer exist, or cannot currently be contacted. Because of the issues with sim/region-to-website communications, this may mean that a check all suddenly shows a lot less vendors than you actually have rezzed inworld. This is an expected consequence.

They will NOT "wake up" vendors to appear on the site.

You will need to wake up the vendors yourself by clicking them and selecting "Admin", or they will wake up once the vendors are actually paid or used by a customer.

Overview Page Options


Auto Update System: This is the "OnRez" check for the vendors. If you send out affiliate vendors in a "no modify" state, you want to turn this OFF, otherwise your affiliates will keep getting bugged to update their vendors.

PayPal, Credit Cards, Etc.


See the PayPal & Credit Cards page for information and background. This option is ON by default, and you do not need a PayPal or credit card merchant account to use it.

Profit Sharing


See the Profit Sharing page for details and instructions - you are able to do this on a per-product and/or per-vendor basis.

Redeliveries


See the Redeliveries page for details about the redelivery process.

Upgrading Your Vendors


For information about how to upgrade your vendors (from an old version to a newer, or from free to premium/paid for example), see the Updating & Upgrading page.

Sales, Discounts and Loyalty Rewards

Only the largest discount (if there are multiple applicable discounts) will apply in any given transaction. Discounts do not stack.

Discounts grid-wide or store-wide


Setting vendors on a gridwide/storewide sale - See Set All Vendors for Grid-Wide Sale.

At this time, you cannot set vendors on a per-sim/region basis with a sale, other than by doing so per-vendor (see next section), or if you have different profiles for different sim/regions, then on a per-profile basis (also next section).

Discounts for everyone on...


Specific profiles - See Setting Discounts on Profiles

Specific vendors - See Setting Discounts for Everyone on a Vendor

If you set a general discount once people reach a certain amount spent in the store, only money that's paid in a purchase will count towards that spend amount. So if you set a general discount of 10% once "Person A" spends L$1,000 or more, only money they've actually paid will count towards that L$1,000 spend point. Anything used on a gift card, and any purchases someone ELSE (say, "Person B") makes to gift to "Person A" will not count to "Person A"'s spend limit.

Discounts for Groups


Group discounts may only be set on on a per-vendor basis at this time. The group discount ability requires an LSL function that compares the worn/active group tag against the group the vendor is rezzed under/set to. For details and instructions, see Setting Group Discounts on a Vendor

NOTE: HoloVend will not show group discount price, but money will still be refunded for any applicable discounts.

Discounts by individual


To give a specific customer a credit balance, see Giving Individuals a Credit Balance

To give a specific customer their own discount, see Setting Discounts for Specific Customers

Loyalty Rewards


First, read about the loyalty program options

Then you can decide whether to:

Set Loyalty Store Credit - See Setting Customer Loyalty Credit

Set Loyalty Cash-Back Discounts - See Setting Customer Loyalty Discounts

Price overrides (Set all things to one price)


Specific profiles - See Setting Price Overrides on Profiles

Specific vendors - See Setting Price Overrides on a Vendor

Discounts/Fees/Shares are applied in this order


Customer discounts:
1) Customer discounts (i.e., if they got to a certain spending level)
2) Customer balances (i.e., spend x, get y store credit type balance)
CasperTech Fees, if applicable
3) Is it a free vendor? Then the free vendor fee applies.
4) Is it an affiliate vendor? Then the affiliate vendor fee applies.
Affiliate Gets, if applicable
5) Affiliate commission
Partner Splits, if applicable
6) Vendor profit shares
7) Product profit shares, if applicable
You
8) Whatever is left

Transactions

NOTE: If you delete a transaction (customer bought a copy item twice, or you arranged a swap for a different item) you will also need to recalculate the customer data (there's a link on the "Customers" page) - until you do, the "discounts" message will reflect - and bonuses for, if applicable - an incorrect total.

Importing Sales Data


To import your sales data from other networked vending systems, see the sales data import page to see which systems are supported, and instructions on how to do so.

Marketplace Sales Data


See the Marketplace ANS Link page for setup instructions.

Transaction Logs


Each inworld merchant sale notification message contains a link to a system log of the transaction - this is a feature unique to CasperVend. This log (more specifically, the "giant wall o' text" below the summary graphics) contains the details of each step that happened during the transaction, so you can see where the trouble is. This lets you resolve issues instead of just wondering why a product didn't get delivered.

Getting YOUR "merchant link":
Look in your local chat history. You should see a notification that looks similar to this:

 CasperVend System: You just sold a ((product name))  to ((customer name)) for ((L$price)) in ((sim/region name)). View the transaction log here: ((clickable web link))

Simply click that link to be taken to your merchant transaction log.

If the transaction log is confusing, you can compare the log to the transaction log analysis page for instructions on how to interpret what you find.

You will get a transaction log from both Holovendors and regular vendors, but not from lucky chairs, gatchas, midnight madness boards, or TextureVend.

Transaction Was Refunded?


Reasons why transactions may be refunded include:

Can't find...

  • System can't find the product
  • System can't find a DropBox at all (either it's not rezzed, or not responding due to sim/region not communicating to/from the internet)

Wrong price / wrong group

  • Customer paid the wrong price (group discount when group tag not active, for example)
  • Vendor is set to group only and customer doesn't have the correct group tag active

Some restrictions apply

  • If you have marked 1 per person (in product listing), then customer attempted to buy twice for the same recipient
  • If you have marked both duplicate copies restricted (in overview tab), and the item as COPY in the product listing, and then customer attempted to buy twice for same recipient
  • If customer is banned, transaction will always be refused
  • If you have affiliate vendors, and the affiliate is banned, transactions through THEIR vendors selling YOUR products will always be refunded
  • If you have a TOS requirement, and the customer either declined or didn't answer the popup.

Customer Updates

Redeliveries


Included in all vendor packs is a redelivery terminal. In addition, each vendor has a "Redeliver" option on the popup menu when clicking the vendor. Customers may use these redelivery options to redeliver any COPIABLE item that you have marked as copy on the website.

It is ONLY the website option that controls this function - if you mark a no-copy item as "copy" by accident, customers will be able to redeliver it, even though they shouldn't, so be very very careful when setting up no-copy products.

Sending product updates to customers


See the Sending Product Updates page for details and instructions.

No Newsletter Mailer


There is no newsletter mailer option at this time; you'll have to use a third-party solution.

Gifting Options

Gift Cards: See the Gift Cards page for setup instructions

Gift Boxes & Gifting: See the Gifts & Gift Boxes page for details.

Expansion Packs & Promotional Tools

CasperVend expansion packs allow you to do more with your store, integrated with your CasperVend system. These are the currently available expansion packs (click each name to be taken to that expansion's documentation page):

Vendor API System

For information on the read-only API, see the API page for details. This API information is intended for people who already know how to script, or can contract with someone who already knows how to script.

Perks of Being a CasperTech Customer

Add yourself to our Business Directory! See the instructions on adding your business listing.

FAQ / Troubleshooting

There is a General FAQ you can check, as well as the more specific FAQ's at the bottom of most of the sub-pages linked from this manual page.